Machine Screws Drill/Tap Info Version 1.4.8 -> 1.4.8c Updates

[APP UPDATE]

Machine Screws Drill/Tap Info Version 1.4.8c released tonight – so check your market for an update in your apps. There are quite a minor improvements:

Version 1.4.8c Update:
– Improved Spanish/Español translation

Version 1.4.8b Update:
– Refines/improves the Drill Chart performance
and fixes force close errors/issues seen on some devices.

Version 1.4.8 Update:
– Added SI units in key values
– Updated Pipe Chart, add 1/16-27
– Updated Pipe Chart, add SI Units
– Updated Drill Chart, add many new screws
– Added setting for Machinist Handbook clearance holes
– Added 13/16, 15/16, M1.5×0.35 screws
– Database corrections
– GUI and bug fixes

**** Personal Notes:
– Many thanks to Pedro (a user of the App) for helping make the translations much more readable on a technical level
– Many thanks to Donald (a user of the App) for feedback leading to better performance of the drill chart
– Many thanks to Lee (a user of the App) for suggesting the Machinist Handbook clearances setting
– Many thanks to Christopher (a user of the App) for suggesting the addition of SI values for torque suggestions, NPT, NPS, and other areas for metric users

PS: I’m still looking for help on the German translations too! (see prior post for more details).

Machine Screws Drill/Tap Info Version 1.4.6a/1.4.7 Updates

[APP UPDATE]

Machine Screws Drill/Tap Info Version 1.4.7 released tonight – so check your market for an update in your apps. There are a few minor improvements:

v1.4.6
-Added Splash screen and start up sound
-Fixed a minor detail on the Drill Chart
it incorrectly referred to #6-48 as #6-38
-Micro English and Metric screws were added
-Many less standard Metric screws were added
[EDIT] – fixed an incorrect value for M15x1.25 – be sure to use 1.4.6a update

v1.4.7
-Added settings for splash screen/sound
-Added settings to confirm exit or not
-Updated share dialog to share app via messaging services

The app now has 82 English screw sizes and 119 Metric screws sizes! Wow!

I’ve noticed and have tried to address the German translation concerns.
This version tries again to improve up the German localization.
With that said, if you know German and can help & I’ll donate some $$$ to you.
There are about 20 or so phrases in the app so it shouldn’t take more than 30 minutes to help me out.  Email me at the contact link above and we can maybe make this work.
PS: same goes for Spanish & any languages you may like to have added too!

Thank you for your support!
~Jim